nDPL-SW (Single)
Single PCB Sawing System
Características
- Single Table Off-Line PCB Sawing System
- X & Y Full-Duplex Cutting (Rotating Saw Head)
- Simultaneous Top/Bottom Dust Removal
- Quick & Easy Programming with Camera & MPG/Jog
- User Friendly GUI Based on IPC & Touch LCD
- Compact Design
Opções
- Vision System
- Barcode Interlock & MES Interface
- Bit Detection System
- ID Verification with Fingerprint
Características
Single Shuttle Table
It is able to respond to the production line flexibly by applied single table. (Lean concept).
X & Y Full-Duplex Cutting
It is able to cut by full-duplex ways as horizontal & vertical with applying the rotating saw head.
Perfect Dust Removal
It is able to be perfect dust removal with simultaneous top/bottom dust collection.
Camera Teaching
It is available teaching accurately & easily to use camera
Compact Design
It is the most compact design for securing customer space
Tool (Saw Blade) Lift Time Management
It sounds alarm for replacement when saw blade is matched with set point. And it is able to set point of the saw blade lift time.
Ionizer
It is standard installation for protected PCB and efficient removing dust(area ionizing type)
Full Graphic Interface
It is easy & comfortable operation by applied GUI base on windows
Safety Sensor
It is applied for safety of operator of loading/unloading PCB.
Opções
OK/NG PCB Separation System
It is separating and releasing the fail PCB by NG conveyer, after getting data of NG PCB from front equipment by MES.
Vision System
It is able to detect different model and loading fail, and available fiducial checking.
Barcode Interlock & MES
It is used vision system or scanner to read the 1D/2D barcode for MES function with costumer’s network
ID Verification with Fingerprint
It is available to be high security user management and easy logging by registered and appreciated user fingerprint.
Dimensional Inspection
It is inspecting cutting measure is qualified or not base on specification after cutting.
Real-Time Self-Diagnosis Dust Collector
It is able to do self-diagnosis about pressure, damage & pollution level inside dust collector and sound alarm to router (patent-pending)
Filter+Cyclone Complex Dust Collector
It is able to use filter semi-permanently with applied cyclone, and install plastic bag.
Easy Handling Dust Collector
It is able to use the plastic bag for disposing dust cleanly & easily.
Especificações
| System Characteristics | Dimensions | 870 x 1360 x 1530 mm (WxDxH) |
| Weight | Approx. 350 kg (w/o Dust Collector) | |
| Axis Configuration | 5 -axes AC servo motor | |
| Working Table | Single Table | |
| Moving Speed | 1000 mm/sec (Max) | |
| Cutting Speed | 50 mm/sec (Max) | |
| Cutting Accuracy | ±0.1 mm | |
| Repeatability | ±0.02 mm | |
| Blade Wheel AC Servo | 400W, 60K rpm(Max) | |
| Number of Head | 1 (as standard) | |
| Head Rotation | Automatic by AC servo | |
| Controller | IPC based Control System | |
| Program Environment | Windows 7 & Graphical User Interface (GUI) | |
| Display | TFT LCD 17” touch monitor | |
| Data Acquisition | Camera with MPG | |
| Noise Level | 70 ± 3dB | |
| Jig Type | Dedicated pallet type | |
| PCB Load Height | 945 ± 30 mm | |
| Dust Collector | 2HP, 3-phase 220V or 380V, 50Hz or 60Hz | |
| Dust Removal | Top & Bottom flow | |
| Installation Requirements | Power Supply | 1-phase 220V, 50/60Hz |
| Air Supply | 5 ~ 6 kg/cm2 (80PSI) | |
| PCB Specifications | Available Size (Max) | 320 x 320 mm |
| Thickness | 0.4 ~ 3.2 mm | |
| PCB Clearance | Within ± 0.1 mm | |
| PCB Material | FR4, CEM-3, Phenol |
Layout
Fazer um Pedido
